Measuring Pins

 

KHURANA CARBIDES introduces an efficent & economical way of checking the bore sizes of the drawing dies using measuring pins offered in steps of 5, 10 & 20 microns.

KHURANA CARBIDES offers measuring pins in hardened steel and tungsten carbide. In both types of pins the material is cryoginally treated and hardened in oxygen free environment to maintain the dimension for a prolong life. As per the suitability of the diameter of pin sizes are either marked or written on the plastic containing of the pin for identification. The whole set of pins are supplied in wooden box for added safety and storage.

SIZE RANGE
IN 5 MICRONS
STEPS
IN 10 MICRONS
STEPS
0.5 - 1.00 mm
101 pcs.
51 pcs.
1.05 - 2.00 mm
300 pcs.
150 pcs.
2.05 - 4.00 mm
300 pcs.
150 pcs.
4.05 - 5.00 mm
300 pcs.
150 pcs.
5.05 - 6.00 mm
300 pcs.
150 pcs.
6.05 - 7.00 mm
300 pcs.
150 pcs.
7.05 - 8.00 mm
300 pcs.
150 pcs.
8.05 - 10.00 mm
300 pcs.
150 pcs.

 

Back to Products

 

Site Designed by ZOBIA